Hubbardton-forge 347521 Manual do Utilizador descarregar pdf

Assembly & Installation Instructions G9

For Outdoor Ellipse Bollard 34-7521 & 34-7521F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21223 Rev A

To Install Fixture (Figure 1)

Component Parts

A Post

B Nipple

C Fixture

D Set Screw

Caution: Be sure power is off at the main breaker box prior to installation.

Site Preparation

1. Run appropriate wiring to the site of the fixture.

2. Install a weather proof electrical box with a gasket cover that has a 1/2-14

NPSM threaded hole in the center (not included).

Installation

Note: Post may be cut to desired height before installation. Be sure to cut from the

non-threaded end

of the post. Remove all sharp burrs.

1. Thread nipple (B) into threaded end of post (A).

2. Feed wires from fixture (C) through post (A) and out through nipple (B).

3. Place fixture (C) onto post (A) carefully tucking all wiring down into post and

making sure no wires are pinched between the post and the fixture. Secure

with set screw (D).

4. Thread post (A) into center hole of electrical box cover.

5. Connect fixture wires to supply wires using appropriate wire connectors (not

provided), black to black, white to white and bare copper or green to bare

copper or green. If fixture is wired with twin lead lamp cord, connect smooth

side of fixture wire to black and ridged side to white.

6. Attach electrical box cover to electrical box.

7. Refer to glass installation instructions on next page.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

1 2

21223 Rev A 1
21223 Rev A 2

Resumo do Conteúdo

Página 1 - 21223 Rev A

Assembly & Installation Instructions G9 For Outdoor Ellipse Bollard 34-7521 & 34-7521F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and

Página 2 - 21223 Rev A

Assembly & Installation Instructions G9 For Outdoor Ellipse Bollard 34-7521 & 34-7521F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and

Comentários a estes Manuais

Sem comentários

Hubbardton-forge 347521 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Iluminação Hubbardton-forge 347521. Hubbardton Forge 347521 User Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Hubbardton-forge 347521